|
The Proton Satria R3 is a limited edition, track-focused version of Proton's Satria hatchback made by R3 (Race Rally Research) or Proton Motorsports Division. It was born out of the success of R3's Satria Street Shoot Out (SSO) racing vehicle. R3 is an abbreviation of Race, Rally, Research. Only 150 units were ever produced. == Model information == The Satria R3, based on the original Satria (which itself is based on the Mitsubishi Mirage Cyborg), was introduced in late 2004. It was conceived as a run-out model of the successful Satria GTi, and was positioned at the top of the Satria range. Original Stage 1 R3s utilises the same Mitsubishi-sourced 1.8-litre, inline-4 engine as the Satria GTi (albeit with a new free-flow exhaust system), producing 140 bhp (105 kW) and 168 nm of torque. Power is channeled to the front wheels via a five-speed manual transmission, also sourced from the GTi. The main modification that separated the R3 from the GTi was its double stitch welded chassis, which meant the car was welded twice for increased structural rigidity, aided by the inclusion of front and rear suspension strut braces. The R3 was also stripped of its sound-deadening material and driver's airbag, which helped bring the weight down to just 995 kg. Suspension improvements included uprated springs and dampers, thicker anti-roll bars and lower ride height. The brakes were also modified to have Anti-lock braking system removed as well as the original ventilated front discs and solid rear discs and replaced by cross-drilled and slotted DBA (Disc Brake Australia) discs all round. M1144 series brake pads were supplied by Mintex Racing. Externally, the R3 is differentiated from the GTi by its lightweight 16-inch Advanti alloy wheels. Although they are the same size as those on the GTi, they have a five-spoke design with a gunmetal finish and wrapped in Yokohama Advan AD07 tyres. Also, the headlamps are smoked and the roof spoiler is now made of carbon fibre. Inside, the R3 has a three-spoke MOMO Tuner steering wheel, carbon fibre gearknob, titanium-effect trim and Recaro SR4 seats. All R3s came in Incognito Black with R3's signature red and silver stripes on the sides, while the interiors of all cars were trimmed in black and red fabric. Only 150 units were ever produced. Later, R3 introduced staged hop-ups for the Satria R3. The two stages (Stage 2 and 3) included a plethora of more hardcore upgrades for the powertrain and chassis. The carbon fibre parts on the R3 are prone to theft. Many owners resorted to removing these lightweight parts and replacing them with those from the GTi, refitting them only during special events. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Proton Satria R3」の詳細全文を読む スポンサード リンク
|